Aquapoint 3 Underbasin Unvented Water Heater 5L, 10L or 15L (AP3/05, AP3/10, AP3/15)
Glass lined steel inner container
Tested to 13 bar
Sacrificial anode
For protection against corrosion
Approvals
WRAS approval and CE endorsed
Insulation
High performance foam
External temperature control
Can be replaced without draining
The Zip Aquapoint III must be installed in accordance with the installation instructions and all current legislation, codes of practice and regulations governing the installation of unvented hot water cylinders in force at the time of installation. The appliance must be permanently connected to the supply through an isolating switch with a contact separation of at least 3mm in all poles and be protected by a suitably rated RCD to protect the appliance, an MCB (miniature circuit breaker) or fuse must be fitted with a rating suitable for the nominal current of the appliance.
The minimum water pressure will vary if a limescale filter is installed.
Original: $283.91
-65%$283.91
$99.37
Description
Glass lined steel inner container
Tested to 13 bar
Sacrificial anode
For protection against corrosion
Approvals
WRAS approval and CE endorsed
Insulation
High performance foam
External temperature control
Can be replaced without draining
The Zip Aquapoint III must be installed in accordance with the installation instructions and all current legislation, codes of practice and regulations governing the installation of unvented hot water cylinders in force at the time of installation. The appliance must be permanently connected to the supply through an isolating switch with a contact separation of at least 3mm in all poles and be protected by a suitably rated RCD to protect the appliance, an MCB (miniature circuit breaker) or fuse must be fitted with a rating suitable for the nominal current of the appliance.
The minimum water pressure will vary if a limescale filter is installed.
